Cart 0

Therm-O-Nator - Thermocouple Amplifier including 250°C Thermocouple

  • £1000

Building a pizza oven? Want to take data from your BBQ or log burning stove? Maybe you want to turn a toaster oven into a surface mount PCB re-flow oven! You need The Therm-O-Nator!

The Therm-O-Nator can be used in projects where temperature up to 1000°C needs to be measured. The Therm-O-Nator is a K-type thermocouple amplifier which can be used to amplify the tiny voltage from a thermocouple to a higher voltage, which is readable by a micro controller. Thermocouples can be used to measure very high temperatures, but they only output a very low voltage, hence the need for this amplifier.

This kit is based upon the AD8495 precision K-type thermocouple amplifier, or the AD8494 J-type version. The board requires a 5V supply and gives a linear output of 5mV per degree C. The circuit board contains filtering for the standard amplifier configuration. It can be used to measure temperatures up to 1000°C.

You can see how the Therm-O-Nator was used as a temperature controller for a reflow soldering oven which used this thermocouple amplifier. A couple of people asked me about this circuit so I decided to quickly make a simple breakout PCB. 

This converter can be used anywhere you need to measure high temperatures - such as soldering temperatures, flue and exhaust gas temperatures, BBQs and ovens.

For temperatures below 100°C we recommend the use of a thermistor, but not many thermistors are rated for temperatures above 150°C. Above 150°C use a thermocouple. A thermocouple puts out a tiny voltage which must be amplified and filtered, use the Term-O-Nator to amplify and filter your thermocouples output so that it can be read by the ADC (analog-to-digital converter) in a micro controller.

This kit now includes a K-type thermocouple suitable for use up to 250°C!

The instructions are available here as a pdf.

The design files are available from GITHUB here.

Please find the "Soldering is Easy" guide available here.

We Also Recommend